5 connecting pc or usb stick for data export, Connecting pc or usb stick for data export – Eppendorf BioSpectrometer basic User Manual
Page 19
19
Installation
Eppendorf BioSpectrometer
®
basic
English (EN)
4.5
Connecting PC or USB stick for data export
You can connect a
FAT 32-formatted USB stick to the USB port 4 (see Main illustration on p. 11).
Alternatively, you can connect the device for the data export directly to a PC by using a USB cable:
Prerequisites
• PC with Windows, version XP, SP2 or higher version.
• USB cable with a type A and type B plug each.
Connect the device to the PC by using the USB cable on the USB port
8 (see Main illustration on p. 11).
• You do not need any special PC software for the data transmission: the transferred data
packets are recognized by the PC like a USB stick as a removable medium. For viewing the
data, you only need to open the registered data packet.
• The transmission of data to the USB stick or to the PC is started after completing the series
of measurement in the
&