Advance Adapters 477023 - Manual (Page 2)

ADVANCE ADAPTERS INC. P/N: 477023
P.O. Box 247, 4320 Aerotech Center Way New Item: (12-01)
Paso Robles, CA 93447 PAGE 2 OF 14
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 02-23-11
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a
service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive
dealerships and parts stores.
TOYOTA LOW GEAR 4.7:1 23 SPLINE
For Gear-Driven Transfer Cases ONLY
SNAP RING LIST:
This is a list of Toyota snap rings that may be needed for your installation should your stock snap rings
become distorted during disassembly or assembly. These snap rings are stock Toyota parts and can be
obtained at a Toyota parts dealership. Advance Adapters does not carry these components.
36221C
90520-28242
1.50-1.55mm
90520-28248 1.60-1.65mm
36223A
90520-30215
2.10mm
90520-30217 2.20mm
36231F
90520-71221
1.65mm with 71.1mm ID
90520-36250 2.40-2.45mm
90520-36251 2.45-2.50mm
90520-36252 2.50-2.55mm
90520-36253 2.55-2.60mm
90520-36254 2.60-2.65mm
90520-36255 2.65-2.70mm
36212D
90520-72001
1.45mm
90520-72002 1.50mm
90520-72003 1.55mm
90520-72004 1.60mm
90520-72005 1.65mm