Snorkel S2633 - Manual (Page 35)

Chapter 8 – Prestart Inspection
S2633 – 8210048 31
Prestart Inspection Checklist
Item Inspect For OK
Operator’s Manual In place, all pages readable and intact
Electrical System
Battery fl uid level Proper level
Battery terminals Clean, connectors tight
Battery charger Proper operation
Cables and wiring harness No wear or physical damage
Hydraulic System
Fluid level Between minimum and maximum marks, cap in place and tight
Hoses, tubes and fi ttings No leaks, all fi ttings tight
Tires Good condition
Wheels All fasteners present with no signs of looseness.
Lower Control Station
Operating controls Proper operation
Emergency stop Shuts off lower controls/proper operation
Emergency Lowering Proper operation
All Motion Alarm Sounds when machine is operated and/or driven
Lowering Alarm Sounds when platform is lowered
Safety Prop No damage or deformation
Structures
Weldments – Chassis, platform, etc. Welds intact, no damage or deformation
Slide blocks In place, no damage or deformation
Fasteners In place, tight, and no damage
Rollers and spacers In place, no damage or deformation
Upper Control Station
Guardrail system Welds intact, no damage or deformation
All fasteners in place, no loose or missing parts
Entry gate In place, no damage or deformation, proper operation
Wallboard loading gate In place, no damage or deformation, proper operation
Lanyard anchors In place, no damage or deformation
Platform extension Proper operation, no damage or deformation
Platform fl oor No damage or deformation, clean to prevent slip and fall hazards
Operating controls Proper operation
Emergency stop Shuts off upper controls/proper operation
Horn Sounds when activated
Placards and Decals In place and readable