beautypg.com

Snorkel X33RT-sn10000+ User Manual

Page 8

background image

Page 4

Operation Manual

Special Limitations

S

PECIAL

L

IMITATIONS

Travel with the plat form raised is lim ited to creep speed range.

El e vat ing the Work Plat form is lim ited to firm, level sur faces only.

D A N G E R

The el e vat ing func tion shall ONLY be used when the work plat form is lev eled and on a firm sur -
face.

P

LATFORM

C

APACITY

The max i mum ca pac ity for the MACHINE, in clud ing oc cu pants is de ter mined by model and op -
tions, and is listed in "Spec i fi ca tions" on page 19.

D A N G E R

DO NOT ex ceed the max i mum plat form ca pac ity or the plat form oc cu pancy lim its for this ma chine.

M

ANUAL

F

ORCE

Man ual force is the force ap plied by the oc cu pants to ob jects such as walls or other struc tures out -
side the work plat form.

The max i mum al low able man ual force is lim ited to 200 N (45 lbs.) of force per oc cu pant, with a
max i mum of 400 N (90 lbs.) for two or more oc cu pants.

D A N G E R

DO NOT ex ceed the max i mum amount of man ual force for this ma chine.

B

EAUFORT

S

CALE

Never op er ate the ma chine when wind speeds ex ceed 25 km/h (15 mph) [Beau fort scale 4].

BEAUFORT

SCALE

WIND SPEED

GROUND CONDITIONS

m/s km/h ft/s mph

3 3.4~5.4 12.5~19.4 11.5~17.75 5~12.0 Papers and thin branches move, flags wave.

4 5.4~8.0 19.4~28.8 17.75~26.25 12.0~18 Dust is raised, paper whirls up, and small

5 8.0~10.8 28.8~38.9 26.25~35.5 18~24.25 Shrubs with leaves start swaying. Wave crests are

6 10.8~13.9 38.9~50.0 35.5~45.5 24.5~31 Tree branches move. Power lines whistle. It is

7 13.9~17.2 50.0~61.9 45.5~56.5 31~38.5 Whole trees sway. It is difficult to walk against the

branches sway.

apparent in ponds or swamps.

difficult to open an umbrella.

wind.

L

IFT

O

VERLOAD

A

LARM

If a load which is greater than the safe work ing load is pres ent in the bas ket all ma chine func tions
will cease to op er ate and an acous tic warn ing will sound. In or der to re turn to nor mal op er a tion a
load equal to or less than the safe work ing load must be pres ent in the bas ket.

D A N G E R

Never op er ate the ma chine with a plat form load greater than the rated ca pac ity.

This manual is related to the following products: