Snorkel LX50-sn4275+ - Manual (Page 19)

Maintenance 067903-025 LX31/LX41/LX50
Operator Manual Page 17
E N G I N E
Figure 12: Engine
C OOLANT
The coolant recovery tank is mounted
on the inside of the door of the power
module.
1. Remove the cap on the coolant
recovery tank.
2. Add coolant to the “FULL” mark.
NOTE: Never remove the radiator cap when the
engine is hot.
O IL
The engine must not be running when
you check and replenish the engine oil.
Refer to the Service Manual to change
the oil filter.
1. Remove the oil dipstick and check the
level indicator marks.
2. If the level is low, remove the oil filler cap.
3. Replenish with the proper engine oil (refer to the engine service manual that came with the machine).
C A U T I O N ! !
DO NOT check coolant when engine or radiator is hot; hot coolant can cause severe burns.
F UEL
Figure 13: Fuel Supply
The fuel tank for is located in the Control Module, behind the chassis controls.
The tank is translucent. Check the fuel level by observing the level of the liquid
through the tank.
3 4
1
2
1 Radiator Cap
2. Coolant Recovery Tank 3. Oil Filler Cap
4. Oil Dipstick