Brother HL-2150N User Manual
Page 58
Control Panel
51
4
Drum life end soon
The drum unit is near the end of its life. We recommend that you get a new drum unit
to replace the current one. See Replacing the drum unit on page 69.
The Drum LED will turn on for 2 seconds and off for 3 seconds.
No paper fed tray1
Put paper in the tray. Then press the Go button. See Printing on plain paper and
transparencies on page 9.
No paper fed manual feed slot
Put paper in the manual feed slot. See Printing on plain paper and
transparencies on page 9 or Printing on thick paper, labels and
envelopes on page 17.
Front cover is open
Close the front cover of the printer.
Fuser cover is open
Close the fuser cover located behind the back cover of the printer.
Paper jam
Clear the paper jam. See Paper jams and how to clear them on page 85. If the printer
does not start printing, press the Go button.
Memory full
The printer memory is full and the printer cannot print full pages of a document. See
Solving print problems on page 97.
Print overrun
A print overrun occurred and the printer cannot print full pages of a document. See
Solving print problems on page 97.
LED
Printer status