Brother HL-2150N User Manual
Page 28
Printing Methods
21
2
Note
• If an envelope is creased after it is printed, turn the next one around 180
°
when you put it in the manual
feed slot, and then in the printer driver choose the Advanced tab, select Page Setting, and check the
Reverse Print box. As an alternative you can change the printing direction in your software application.
• If the DL size double flap envelope is creased after printing, choose DL Long Edge in Paper Size, from
the Basic tab. Put a new DL size double-flap envelope in the manual feed slot with the longest edge of
the envelope in first, then print again.
• If envelopes get smudged during printing set the Media Type to Thick Paper or Thicker Paper to
increase the fixing temperature.
• Envelope joints that are sealed by the manufacturer should be secure.
• All sides of the envelope should be properly folded without wrinkles or creases.