Brother HL-2150N User Manual
Page 21
Printing Methods
14
2
d
Using both hands, put one piece of paper or one transparency in the manual feed slot until the front edge
of the paper or transparency touches the paper feed roller. When you feel the machine pull in the paper,
let go.
Note
• Put the paper into the manual feed slot with the side to be printed face up.
• Make sure that the paper or transparency is straight and in the correct position on the manual feed slot. If
it is not, the paper or the transparency may not be fed properly, resulting in a skewed printout or a paper
jam.
• Do not put more than one piece of paper in the manual feed slot at any one time, as it may cause a jam.
• If you put any media (paper, transparency and so on) in the manual feed slot before the printer is in the
Ready state, the media may be ejected without being printed on.