Brother HL-2150N - Manual (Page 17)

Printing Methods
10
2
c
Put paper in the tray, and make sure that the paper is below the maximum paper mark (1). The side to
be printed on must be face down.
CAUTION
Make sure the paper guides touch the sides of the paper so it will feed properly. If you do not this, it may
cause damage to your printer.
d Put the paper tray firmly back in the printer. Make sure that it is completely inserted into the printer.
e Lift up the support flap 1 (1) to prevent paper from sliding off the face-down output tray.
1
1