Brother HL-2150N - Manual (Page 40)

Driver and Software
33
3
„ Print Setting
You can manually change the print setting.
• General
This is a printing mode for general printing of documents.
• Graphics
This is the best mode for printing documents that contain graphics.
• Office Document
This is the best mode for printing office documents.
• Manual
You can change the settings manually by choosing Manual and clicking the Setting... button. You can
set brightness, contrast and other settings.
Duplex Printing
3
„ Manual Duplex
Check the Duplex box and choose Manual Duplex. In this mode, the printer prints all the even numbered
pages first. Then the printer driver will stop and show the instructions required to re-install the paper. When
you click OK the odd numbered pages will be printed. There are six types of manual duplex binding
directions available for each orientation.
„ Booklet Printing
When you want to print a booklet, use this function. To make the Booklet, fold the printed pages down the
middle, when using the booklet printing function.
„ Binding Offset
If you check the Binding Offset option, you can also specify the offset for binding in inches or millimeters.
Watermark
3
You can put a logo or text into your documents as a watermark.
You can choose one of the preset watermarks, or you can use a bitmap file or text file that you have created.
When you use a bitmap file as a watermark, you can change the size of the watermark and put it anywhere
you like on the page.
When you use text as a watermark, you can change the font, darkness and angle settings.
Page Setting
3
You can change the print image scaling and choose Mirror/Reverse print options.