MBW Blitzscreed - Manual (Page 6)

4
Decals shown below are located only on the hydraulic winches.
ROTATING PARTS
Keep hands away!
15518
WARNING
15401
AUTO STOP MUST BE ADJUSTED EACH
TIME SCREED LENGTH OR OPERATING
CONDITIONS CHANGE. SET TRAVEL
SPEED, THEN INCREASE OR DECREASE
AUTO STOP RESISTANCE TO A POINT
SLIGHTLY HIGHER THAN REQUIRED TO
MAINTAIN DESIRED TRAVEL SPEED.
15399
#15399 (TOP OF SUPPORT FRAME)
#15518 (WINCH COVER)
#15401 (TOP OF VALVE BLOCK, LEFT)
#15400 (TOP OF VALVE BLOCK, RIGHT)
15400
15361
CABLE IN
ENGAGE
CABLE OUT
CABLE OUT
15632
CABLE IN
ENGAGE
DISENGAGE
15398
DISENGAGE
15634
#15634 (WINCH COVER, LEFT) #15398 (WINCH COVER, RIGHT)
#15631 (WINCH COVER, LEFT) #15632 (WINCH COVER, RIGHT)