Apple Macintosh PowerBook 1400 - Manual (Page 66)

2 Make sure that the BookCover’s center tabs and the two shorter side tabs are all
positioned so that they will fit into the openings on the rear part of the display case.
It’s important to position the BookCover carefully to avoid breaking one of the
tabs when the cover snaps into the case. You may want to change the angle of
the display to see whether the tabs are in the proper position.
3 Move the latch hook to the left and hold it open with one thumb. Use your fingers to push
the BookCover backward until it snaps into place.
If any of the tabs is showing, hold the latch hook open and remove the
BookCover. Then realign the tabs and slide the cover into place.
4 Release the latch hook when the cover is in place.
1 Push and hold the latch all the way to the left.
2 Then push the new panel all the way in and release the latch.
66 Chapter 3