Apple Macintosh PowerBook 1400 - Manual (Page 43)

Using Apple Remote Access with a PC Card modem
Apple Remote Access uses modem files (sometimes called connection scripts
or CCLs) to get the best performance from some modems. Follow these steps
to select your modem file:
1 Insert your PC Card modem.
2 Open the Remote Access Client application program.
If you need to install the software, open the Installer program or the Install
Remote Access Client icon and follow the instructions on the screen.
3 Open the Remote Access Setup control panel by choosing it from the Setup menu or
from the Control Panels folder in the Apple menu.
The following screen appears:
4 Choose your modem from the Modem pop-up menu.
If your PC Card modem is not listed, check in the ARA Connection Files
folder (inside the PC Card Modem Files folder in the Apple Extras folder on
your hard disk). If the file for your modem appears, drag it to the Extensions
folder (inside the System Folder). If the file for your modem is not listed, try
using an existing modem file from the pop-up menu (such as a different
model from the same manufacturer). If this doesn’t help, you may need to get
a connection script from your PC Card modem’s manufacturer.
43 Using Expansion Bay Modules and PC Cards
Select the modem you are using here.
Select the slot your PC Card
modem is inserted in here.