beautypg.com

Apple Macintosh PowerBook 1400 User Manual

Page 56

background image

Quitting SCSI disk mode

1

Shut down the computer your PowerBook is connected to.

2

Press the Power (on/off) key once to turn the PowerBook off.

Occasionally the PowerBook may not shut down (the pointer freezes on the
screen). If this happens, press the reset button on the back panel to turn off
the computer.

3

Turn off any other SCSI devices in the chain.

4

Disconnect the PowerBook from the adapter cable.

If you plan to connect your PowerBook regularly to the same computer, you
can leave the adapter cable attached to the SCSI chain or the other computer.

IMPORTANT

Do not leave the adapter cable attached to the PowerBook. If you

do, the computer may behave as though it is still in SCSI disk mode when you
try to restart.

5

If necessary, disconnect the adapter cable from the other computer or its SCSI chain.

Your equipment is now ready for normal use. If you disconnected the adapter
cable from the other computer or SCSI chain, make sure that the SCSI chain
is properly terminated.

56

Chapter 3