Apple Macintosh PowerBook 1400 - Manual (Page 181)

15 Secure the card to the expansion port on the computer’s back panel by fastening the two
screws supplied with the card into the holes in the port.
Use a small Phillips screwdriver to tighten the screws.
16 Place the expansion port cover supplied with the card over the two screws and snap it
into place. Be sure that the lower-left corner of the cover is under the wire hinge of the
small door on the back panel.
The cover has plastic tabs that hold it in place. You may need to push hard to
attach the cover.
17 If you plan to use the expansion slot card immediately, connect the cable or other device
designed for use with the card through the opening in the cover.
See the expansion slot card’s manual for complete instructions.
18 Replace the battery and reconnect the plugs, cables, and power adapter.
Now you’re ready to use the expansion slot card in your PowerBook.
Expansion
card screws
Expansion
port cover
Slide bottom left
corner under wire.
181 Installing Expansion Cards