Apple AppleShare IP 6.1 - Manual (Page 34)

34 Chapter 2
You need to set up your TCP/IP control panel before you can provide services over TCP/IP.
See the instructions in “Setting Up TCP/IP” on page 15. Then return to “Using AppleShare IP
Easy Setup” on page 31.
Normal Setup
You should use the Normal setup option if you already have a DNS server on your network.
When you choose Normal, AppleShare IP Easy Setup displays the following screen.
1 Type the AppleShare IP 6.1 serial number in the text box, then click the right arrow.
Note: If you are upgrading from a previous version of AppleShare or AppleShare IP, your
previous serial number appears in the window. You do not need to enter a new serial
number.
You can find your serial number on the label of your AppleShare IP CD holder or on the
sheet you received when purchasing a new serial number. Be sure to store the serial number
in a safe place. You may also want to keep a photocopy of the number in another location.
Important The serial number comes printed on a small adhesive label. Don’t put the label
on a CD-ROM disc or floppy disk. The label could come loose while inside a disk drive and
damage the drive.