Apple Remote Access MultiPort Server - Manual (Page 9)

Installing expansion cards
The number of expansion cards that you can install in the server computer
depends upon the number of slots available in the computer. For example, if
you are using an Apple Workgroup Server 8150 as the server computer, you
can install a maximum of three 6-port serial cards, resulting in sixteen possible
ports, with two left over.
IMPORTANT Each Remote Access MultiPort Server package contains a Smart
Serial 6 six-port expansion card and six-ended connector cable. You must
purchase an Apple Remote Access MultiPort Server package for each
additional six ports you wish to use, up to the sixteen-port maximum.
You can use an Apple Remote Access MultiPort Server package to expand an
Apple Remote Access version 2.1 server, or to upgrade and expand an existing
Remote Access version 2.0 server. The expansion card must be compatible
with the system you are upgrading or expanding.
Instructions for installing the expansion card are provided in the card
installation guide that accompanies the product.
Installing expansion cards 9
Make sure the
AppleTalk Active
button is selected.