Apple Remote Access MultiPort Server - Manual (Page 30)

13 Click the close box to close the Port window.
The Port Configuration window is still visible. Now that you’ve configured the
port, you must turn it on to make it active for receiving and making calls.
14 Select the port and click the Turn On button to turn on the port.
Note: If you are using the Security Zone software, you will be required to
enter a password at this point. You will only be required to enter this password
the first time you turn on a port.
Following is a sample Port Configuration window in which all ports on an
expansion card have been configured.
30 Chapter 3 / Setting Up the Server