Apple Remote Access MultiPort Server - Manual (Page 42)

3 Click the Dial-In Access Enabled checkbox.
If you want to revoke Guest access at a later time, you can deselect this option.
Note: If you want to provide AppleShare access, make sure that you select the
Login Enabled option in the AppleShare Guest User information window.
4 Click the “Maximum connection time” checkbox and enter a time in minutes if you want
to limit the amount of time for which a Guest User can connect to the server.
The default time is 60 minutes.
5 Enable access to a selected zone by making a selection from the “Allow Access to”
pop-up menu.
You can allow access to This Macintosh Only (the server computer), one selected
zone in addition to the zone the server is in, or the entire network. You can
also, if necessary, allow access to all zones but one by choosing All Zones
Except Listed from the “Allow Access to” pop-up menu and selecting a zone
from which you want to exclude guests. You cannot exclude the zone in which
the server computer is located.
42 Chapter 3 / Setting Up the Server