Apple Remote Access MultiPort Server - Manual (Page 57)

Changing zone access
The section “Creating a New User” in Chapter 3 describes the different types
of zone access you can select for users. Zone access determines which zones
on your network a user can access.
This section describes how to change a user’s zone access by removing zones
from the Zone List in the User information window. If you have selected This
Macintosh Only or Entire Network for a user, you must change the option in
the “Allow Access to” pop-up menu in the User information window before
you can change the user’s zone access.
Note: If you choose the All Zones Except Listed option, you cannot add the
zone in which the server computer is located to the user’s Zone List.
To change zone access for a user:
1 Select a user from the User List.
2 Click the Open button in the User List window or choose Open User from the Users menu.
The User information window appears.
Changing settings for a single user 57