Apple Power Macintosh 8600 - Manual (Page 86)

6 Plug the other end of the video cable into either the S-video input port ( æ ) or the yellow
RCA Video input port ( ˜ ) on the Macintosh.
If the S-video connector doesn’t slide easily into the port, check the pin
alignment and try again. Don’t use force, which could damage the computer
or cable.
7 Plug the RCA-type connectors on the audio cables into the left and right RCA Audio Out
ports on the VCR or camera.
8 Plug the RCA-type connectors on the audio cables into the left and right RCA input ports
( - ) on the computer.
If the cable is color-coded, the red connector is for the right port, and the
black or white connector is for the left port.
The following illustrations show S-video connections and composite video
connections for both a VCR and a camera. Your finished connections should
look like one of the following:
S-video connection for input from a VCR
S-video
input port
S-video Out
port
S-video cable
VCR
æ Audio
input ports
(left and right)
Audio Out ports
(left and right)
Dual RCA-plug cable
(available at most electronics supply stores)
-
86 Chapter 7