AEM Infinity Supported Applications - GM LSX 58X Engine - Manual (Page 16)

16
© 2014 AEM Performance Electronics
Infinity
Pin
Hardware
Reference
7100-XXXX-62
7101-XXXX-63
Function
Dest. Pin GM LS Hardware Specification Notes
C2-52 Coil 8 Coil 8 IC 8 Control 25 mA max source current
0–5V Falling edge f ire. DO NOT
connect directly to coil primary .
Must use an ignitor OR CDI that
accepts a FALLING edge f ire
signal.
C2-53 Coil 9 Coil 9 25 mA max source current
0–5V Falling edge f ire. DO NOT
connect directly to coil primary .
Must use an ignitor OR CDI that
accepts a FALLING edge f ire
signal.
C2-54 Coil 10 Coil 10 25 mA max source current
0–5V Falling edge f ire. DO NOT
connect directly to coil primary .
Must use an ignitor OR CDI that
accepts a FALLING edge f ire
signal.
C2-55
Highside Fuel Pump
switch
Fuel Pump
See Main Relay /Fuel
Pump Schematic
Highside switch, 0.7A max,
Solid State Relay , NO
internal f ly back diode. +12V High Side Driv e. Will prime
f or 2 seconds at key on and
activ ate if RPM > 0.
C2-56 Not used Not used Not used Not used
Infinity Pin Numbering
AEM Infinity Connectors View ed from Wire Side