AEM 30-4900 Wideband Failsafe Gauge - Manual (Page 8)

Page 9
Gauge Configuration
In this tab, the gauge lighting and display features can be configured.
Display Option
Option Description
Center
Display
Center display reading configuration; use to select either pressure (InHg / PSIg or Bar) or O2 sensor
(AFR or Lambda)
Installed
Faceplate
Faceplate configuration; use to match 24 outer LEDs to faceplate with either Pressure (InHg / PSIg
or Bar) or O2 sensor (AFR or Lambda) [See Appendix II – Changing Faceplate / Bezel]
Alarm Flash
Option Description
Flash Speed Select speed of flashing while alarm is triggered; flash slow or fast
Dimmer Max Brightness
Option Description
Dimmer Max
Brightness
Select whether +12V or ground indicates maximum backlighting brightness
Bar-Graph LED Color
Option Description
RED LED (1) Can be disabled; use slider to configure multiple LEDs. Reference gauge display at bottom right.
ORG LED (2) Can be disabled; use slider to configure multiple LEDs. Reference gauge display at bottom right.
GRN LED (3) Cannot be disabled; use slider to configure multiple LEDs. Reference gauge display at bottom right.
ORG LED (4) Can be disabled; use slider to configure multiple LEDs. Reference gauge display at bottom right.
RED LED (5) Can be disabled; use slider to configure multiple LEDs. Reference gauge display at bottom right.