AEM 30-4900 Wideband Failsafe Gauge - Manual

AEM Performance Electronics
2205 126 th Street Unit A, Hawthorne, CA. 90250
Phone: (310) 484-2322 Fax: (310) 484-0152
http://www.aemelectronics.com
Instruction Part Number: 10-4900 Rev B
 2012 AEM Performance Electronics
Instruction Manual
P/N 30-4900 Wideband Failsafe Gauge
Wideband Failsafe Gauge Parts List
This product is legal in California for racing vehicles only and should never be used on public highways.
WARNING:
!
This installation is not for the electronic novice or the PC illiterate!
Use this system with EXTREME caution! If you are not well versed
in electronics and vehicle instrumentation or are not PC literate,
please do not attempt the installation. Refer the installation to an
AEM trained tuning shop. A list of AEM trained tuning shops is
available at
www.aemelectronics.com/dealer_locator.php or by
calling 800-423-0046. You should also visit the AEM Performance
Electronics Forum at http://www.aemelectronics.com.
NOTE: AEM holds no responsibility for any engine damage that
results from the misuse of this product!
Qty Description Qty Description
1 Wideband Failsafe Gauge 1 Faceplate, Lambda Black
1 UEGO Sensor 1 Faceplate, Vacuum Black
1 UEGO Harness 1 Harness, Input / Output
1 Install Kit w/ Bung 1 Rubber Band
1 Power Harness 1 Wideband Failsafe Instructions
1 USB Cable 1 Gauge Box
1 Faceplate, AFR White 1 Boost Hose Adapter
1 Faceplate, Boost Black 1 Vacuum Hose, 7/64” ID x 36” L
1 Faceplate, Boost White 1 Silver Bezel