2 amplitude modulation submenu, 3 frequency modulation submenu, Amplitude modulation submenu – BNC 835 User Manual User Manual
Page 41: Frequency modulation submenu
Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901
Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected], Web: www.berkeleynucleonics.com
4.3.2
Amplitude Modulation Submenu
In the Amplitude Mod submenu the internal amplitude modulation can be accessed. Use the
rotary
knob
to set the modulation rate between 1 Hz and 10 kHz.
Enable modulation by pressing the
RF On/Off button
.
Exit the submenu by pressing the
menu key
.
Figure 4-g Amplitude Modulation Submenu
4.3.3
Frequency Modulation Submenu
In the frequency modulation submenu the internal and external frequency modulation can be
accessed. Use cursor keys to change between internal and external modulation source and change
modulation parameters such as modulation rate, depth or sensitivity. Enable modulation by pressing
the
RF On/Off button
.
Exit the submenu by pressing the
menu key
.