4 list sweep submenu, List sweep submenu – BNC 835 User Manual User Manual
Page 39
Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901
Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected], Web: www.berkeleynucleonics.com
4.2.4
List Sweep Submenu
When entering the List Sweep submenu, a list of stored list sweeps is displayed.
After accessing the List Sweep submenu the first of total two displays allow to enter start and stop
power by using the
→ ←
keys to select the digits and using the rotary knob to increase and decrease
their values. Use the
↓ ↑
arrow to move between the several displays that contain settable sweep
parameters. On the first display the number of repetitions of the list can be entered and the ALC can
be set on or off.
On the second display a particular list can be selected from the flash memory of the device.
Start the sweep by pressing the
RF On/Off button
. The
submenu can always been exited
(without
starting the sweep) by pressing the menu key.
Figure 4-d Displays shown for the list sweep configuration
Repetition
ALC on/off/hold
Sweep Freq
Sweep Power