Fast & Fluid Ferraris Automatic Mixer - Manual (Page 34)

FAST & FLUID MANAGEMENT srl
A Unit of Idex Corporation
1155432A-it,en,de.doc – 11/09/2006 34
Lubrication of the blocking screws wheel.
Preparation of the machine Greasing of the blocking wheel
Close the door/shutter and
enter in the machine
Close completely the cradle
plates
Open the door/shutter and
switch off the machine
Using a key of 8 mm. remove
the screws of the toothed
wheel
Remove the old grease by
using a cloth
Put the grease on the toothed
wheel using a brush
Verify that the grease cover
the space among the teeth
Assemble again the protection
in its position.
Lubrication of the unblocking lever and shafts of the trolley.
Preparation of the machine
Close the door/shutter and switch on the machine
Close completely the cradle plates
Open the door/shutter and switch off the machine
Turn manually the cradle of half a turn
Push the lever, take out the trolley and block it.
Blocking lever gear and shafts for taking out the trolley
Grease the lever and slots with a
brush
Grease the shafts of the trolley
using a brush
Move the trolley and repeat the
operation on previously covered
part of the shaft