Fast & Fluid Ferraris Automatic Mixer - Manual (Page 33)

FAST & FLUID MANAGEMENT srl
A Unit of Idex Corporation
1155432A-it,en,de.doc – 11/09/2006 33
Cleaning and lubrication of the crown bevel gear
Preparation of the machine Cleaning of the crown gear Greasing of the crown gear
Close the door/shutter and switch on the
machine
Open completely the cradle plates
Open the door/shutter and switch off the
machine.
Using a key of 8 mm. remove the screws
of the two protections of the crown bevel
gear.
Remove the old lubricant and the
residual paints using a cloth
Put the grease on the crown bevel gear
using a brush
Turn manually the cradle repeating the
greasing on all the crown bevel gear.
Verify that the grease cover the space
among the teeth .
Assemble again the two protections in
their position
Lubrication of the central triple gear group.
Preparation of the machine Greasing of the triple gear group
Close the door/shutter and switch on the
machine
Open completely the cradle plates
Open the door/shutter and switch off the
machine
By using an 8 mm key, remove the
screws of the protection of the triple gear
group
Remove the old grease with a cloth
Put the grease on the conical gears
using a brush
Verify that the grease cover the space
among the teeth
Assemble again the two protections in
their position