Fluid Management 53PD Blendorama User Manual - Manual (Page 7)


Fluid Management Customer Service 1 . 800 . 462 . 2466 Blendorama Dispenser | 5
Important Safety Information
Information and Instruction Labels
You should become familiar with the information labels affixed to the machine, as well as
the warnings, cautions, and notes which appear throughout this guide.
Read all the warning labels on the exterior and interior of the dispenser. If the labels
become damaged or unreadable, you may purchase replacements from Fluid
Management Customer Service.
Safety Notice Information
The two main notices used in this Guide and on the Blendorama Series Dispensers are
Warning and Caution. A Warning notice tells you about a hazard that could cause
serious injury to you or extensive damage to the equipment. This information is featured
in the beginning of the guide to emphasize safety.
When you see a Warning notice in this guide, read it carefully before continuing with the
operation of the machine. Take all necessary precautions to avoid potential injury.
A Caution notice tells you about a danger that could cause injury to you or minor
damage to the dispenser. When you see a Caution notice in this guide, read it carefully
and be sure you understand it before continuing.
General Safety Information
DO NOT attempt to service a product yourself unless instructed to do so by Fluid
Management Customer Service. Use only a Fluid Management Authorized Service
Technician to repair your equipment. Please note that some parts can be upgraded or
replaced by the customer. Fluid Management identifies those parts as such and provides
documentation with instructions when it is appropriate for customers to replace those
parts. You must closely follow all instructions when performing such replacements.
ALWAYS make sure that the power is turned off and that the machine
is unplugged before you attempt the replacement. If you have any questions or concerns,
contact Fluid Management Customer Service.
Warning
Unplug before
servicing
•
Warning
DO NOT use with
or near
flammables
Warning
Use a dedicated
15 amp circuit
(USA & Canada)
16 amp circuit for
all others
•
•