Fluid Management 53PD Blendorama User Manual - Manual (Page 6)

4 | Blendorama Dispenser

Fluid Management Customer Service 1 . 800 . 462 . 2466
How to Use this Guide
This guide is organized into ten sections. Each section provides detailed information
on Blendorama Series Dispenser topics and provides a basic reference that can be
used to help you with specific issues.
This guide provides instructions for safely and easily installing your Blendorama
Series Dispenser when it arrives. This publication also includes operational
instructions, daily and maintenance procedures, basic troubleshooting suggestions,
customer service, and warranty information.
If you are an experienced user, you may already know enough to get started. Make
sure you look over the information in Getting to Know Your Blendorama Series
Dispenser to find out about the features of this Blendorama Series Dispenser.
If you have internet access, the most current information for your Blendorama Series
Dispenser is available from the worldwide web at
http://www.fluidman.com
For Your Safety
Customer safety is important. Our products are designed to be safe and effective.
However, dispensers are electrical equipment. The Blendorama Series Dispenser is
safe and reliable—designed to bring many years of operation. There are precautions
you can take to avoid damage to the equipment or bodily injury before operating. By
carefully following the instructions in this document and the warning and maintenance
labels on the machine, you can help protect yourself from hazards and create a safer
work environment.
Equipment can become damaged due to misuse or neglect. Some product damage is
serious enough that the product should not be used again until it has been inspected
and, if necessary, repaired by a Fluid Management authorized service technician. As
with any electronic device, pay close attention to the dispenser when it is turned on.
On very rare occasions, you might notice an odor or see a puff of smoke or sparks
vent from your machine, or you might hear sounds like popping, cracking or hissing.
These conditions might merely mean that an internal electronic component has
failed in a safe and controlled manner. However, it may indicate a potential safety
issue. DO NOT take risks or attempt to diagnose the situation yourself. Contact Fluid
Management at 1-800-462-2466 for assistance.
Important: Carefully read all the installation instructions and the safety
information before you first use your Blendorama Dispenser.
About this Guide
Safety Precautions
• Read this guide and all
warning labels before
using the machine.
• Keep this guide in a safe
place.
• Read and adhere to all
Warning and Caution
labels on the machine.
• Prepare, level, and
clear the area where the
machine will be installed.
• To avoid risk of fire or
injury, unplug the power
before servicing electrical
components.
• DO NOT use Dispenser
on or near flammable or
combustible materials
• DO NOT mix flammable
materials.
• Plug into an approved
grounded outlet only.
Make sure the outlet
meets all national and
local codes.
•
Cautions
• To reduce the risk of
electric shock or injury,
use indoors only.
• This Dispenser contains
moving parts. Tightly
seal the container before
operating.