Getting started, Installation (continued) – Fluid Management 53PD Blendorama User Manual User Manual
Page 13

Fluid Management Customer Service 1 . 800 . 462 . 2466
Blendorama Dispenser | 11
For Interior Canisters
4
Place the canister
a. Firmly push the canister and connecting tube into
the remote bracket and pump assembly.
5
Attach assembly to the turntable
a. Fit Phillips-head screws located in the canister into
the inner ring location keyholes.
b. Fit the remote bracket into the 4 slots
simultaneously and push firmly into position.
Note: If the bracket face is not firm against the
turntable edge, then the extension tube is
not correctly fitted.
6
Secure inner ring canister assembly
a. Tighten the washer-collar, self-tapping screw
(provided).
7
Repeat steps for all other canisters
Getting Started
Installation (continued)
This manual is related to the following products: