Fluid Management 53PD Blendorama User Manual - Manual (Page 19)


Fluid Management Customer Service 1 . 800 . 462 . 2466 Blendorama Dispenser | 17
e. Pour the contents of each colorant can into the
correct canister. Discard the colorant can and
replace the canister lid.
2
Purge the pumps
a. Set the gauge of each pump to its halfway point
by operating the spring loaded button then lifting
the gauge by its handle.
b. Without operating the valve lever lift the pump
handle to its maximum travel (this draws the
colorant into the canister).
c. Discharge the colorant back into the canister by
depressing the pump handle fully. Repeat this
process 30 times.
Basic Operation
First time operation (continued)