Fluid Management 53PD Blendorama User Manual - Manual (Page 38)

36 | Blendorama Dispenser

Fluid Management Customer Service 1 . 800 . 462 . 2466
2
Inner pump calibration
a. To calibrate the inner (red) plunger, refit the inner
(red) gauge and plunger removed in step (1). Set
the inner (red) gauge to zero.
b. Using the Allen key, undo the calibration
grubscrew in the red pump handle until free
movement can be felt in the handle. Carefully
wind the grubscrew back down until no free
movement can be felt between the red pump
handle and the red gauge knob. Be careful not
to over-adjust.
c. The pump is now calibrated.
General Maintenance
Pump calibration - Model 25 PD (continued)