Fluid Management 53PD Blendorama User Manual - Manual (Page 25)


Fluid Management Customer Service 1 . 800 . 462 . 2466 Blendorama Dispenser | 23
a. Clean the machine, refill canisters and check for
blockages.
b. Wipe down stand, canisters and pumps with a
moistened cloth.
c. Check nozzle outlets for dried colorants.
d. If dried colorant is found to be blocking the
nozzle, open the valve to remove and replace
the nozzle. Ensure the O-ring is retained. Clean
the nozzle using warm soapy water.
e. Refit the nozzle and dispense a small amount of
colorant.
Maintenance, Care, and Use
Daily maintenance