Fluid Management 53PD Blendorama User Manual - Manual (Page 27)


Fluid Management Customer Service 1 . 800 . 462 . 2466 Blendorama Dispenser | 25
a. Inspect the function of the valve and the canister
for leaks.
b. Make sure the machine is disconnected from the
power source.
c. Remove canister from turntable and drain
colorant into a clean container.
d. Remove stirrer paddle from canister and wash
the canister, lid, and stirrer paddle.
e. If required, tighten or replace the valve insert
sleeve (with the wrench supplied). Take care not
to over tighten or sleeve with crack.
Maintenance, Care, and Use
Periodic maintenance (every 3-6 months)