Fluid Management 53PD Blendorama User Manual - Manual (Page 22)

20 | Blendorama Dispenser

Fluid Management Customer Service 1 . 800 . 462 . 2466
1
Select the color, base and can size
a. Identify the color you wish to supply either by name or number
b. Look up the tint formula and note the tint base required
c. Identify the quantity required (can size)
2
Position the can
a. Place the can on the appropriate can shelf.
b. Adjust the height of the upper can shelf,
if necessary.
3
Bring canister to the correct position
a. Depress and hold the detent lever (or knob) to
release the turntable.
b. Rotate the turntable so that the pump of the
appropriate canister is directly over the can. If
the detent lever (or knob) is released it will lock
the canister into the correct position. You may
need to move the turntable slightly from side to
side to allow the locking pin to locate the locking
hole.
Basic Operation
General use of the dispenser