Fluid Management 53PD Blendorama User Manual - Manual (Page 12)

10 | Blendorama Dispenser

Fluid Management Customer Service 1 . 800 . 462 . 2466
For Exterior Perimeter Canisters
4
Select a canister assembly
5
Place the canister
a. Fit the canister screws into the outer ring of the
keyhold slots on the turntable.
b. Push firmly into position (see page 13-15 for
proper layouts).
6
Fix the canister into position
a. Locate the 2 guide holes directly below each
canister and fasten the Phillips-head screws
located in the canister.
b. Make sure the canister is firmly secured.
7
Repeat steps for all other canisters
Getting Started
Installation (continued)