Hale CAFSPro - Manual (Page 2)

NOTICE !
Class1 cannot assume responsibility for product failure resulting from improper
maintenance or operation. Class1 is responsible only to the limits stated in the
product warranty. Product specifications contained in this manual are subject to
change without notice.
All Class1 products are quality components -- ruggedly designed, accurately
machined, precision inspected, carefully assembled and thoroughly tested. In
order to maintain the high quality of your unit, and to keep it in a ready condition, it
is important to follow the instructions on care and operation. Proper use and good
preventive maintenance will lengthen the life of your unit.
ALWAYS INCLUDE THE UNIT SERIAL NUMBER
IN YOUR CORRESPONDENCE.
ECO NO REV CHANGE FROM BY DATE APVD
HALE PRODUCTS, INC.
A Unit of IDEX Corporation
Conshohocken, PA 19428 USA
0032 A INITIAL RELEASE LwH 02/14/2005
DRAWN BY LwH ISSUE DATE COPYRIGHT ©
NOT TO BE REPRODUCED OR USED TO
MAKE OTHER DRAWINGS OR MACHINERY.
CHECKED BY 02/14/2005
Manual p/n: 029-0020-75-0, Rev. -A
Printed in U.S.A. © Hale Products, Inc. 2005
All Rights Reserved
APPARATUS INFORMATION
ENGINE ______________________________________________
TRANSMISSION _______________________________________
MAXIMUM CAFS ENGINE RPM ___________________________
CAFS ENGINE SPEED RANGE ___________________________