6 torrent svs valves, Figure 3-10: typical svs valve primary components, 7 additional midship accessories – Hale Q Series Muscle User Manual
Page 44: Auxiliary heat exchanger / cooler, model k
Accessories / Options
44
MUSCLE (Midship) Pumps Installation, Operation, and Maintenance Manual
p/n: 029-0020-63-0
3.6 TORRENT SVS VALVES
Torrent SVS valves control the flow to and from the full range of Hale pumps. SVS
valves enable the operator to shut off flow completely, or throttle the flow rate from a
trickle to full flow.
Figure 3-10: Typical SVS Valve Primary Components
Numerous adapters tailor the valve to almost any installation requirement. See sepa-
rate manual (Hale p/n: 029-0020-90-0) provided for detailed operating and service
instructions.
3.7 ADDITIONAL MIDSHIP ACCESSORIES
Auxiliary Heat Exchanger / Cooler, Model K
The Hale Model “K” heat exchangers, meet NFPA 1901 requirements. These units are
used with any size radiator and use water from the pump to help maintain the proper
temperature of the engine coolant during pumping.
Note: A valve is normally added at the operator’s panel allowing the operator to control the
amount of water supplied to the Model “K” heat exchanger.