Figure 2-12: typical gearbox overview, A-series – Hale Q Series Muscle User Manual
Page 33
33
MUSCLE (Midship) Pumps Installation, Operation, and Maintenance Manual
p/n: 029-0020-63-0
Introduction
Typically, the gearbox is constructed of fine grain alloy cast iron, with a minimum ten-
sile strength of 30,000 PSI (207 N/mm
2
). These units can withstand the full torque of
the engine in ROAD operating conditions up to 16,000 pounds-feet (21,693 N-m).
Figure 2-12: Typical Gearbox Overview
A-Series
The Hale A Series Gearbox is a 2-gear unit driven by a PTO and designed for top or
rear-mount pump applications. This gearbox has a wide range of ratios available to
allow for use on different engine, transmission and PTO combinations. (See Figure 2-
12: “Typical Gearbox Overview.”)
This manual is related to the following products: