Hale Q Series Muscle - Manual (Page 188)

 Lube and Sealant Specifications
188 MUSCLE (Midship) Pumps Installation, Operation, and Maintenance Manual
p/n: 029-0020-63-0
Note: * For domestic use, Hale recommends using an SAE EP-90, 80W-90 Lubricant or
“Roadrunner” Full Synthetic SAE 50 Transmission Lubricant, manufactured by the Eaten
®
Corporation, or equivalent.
Grease
Use a Lithium-based grease with 1% to 3% Molybdenum Dissolved, i.e.,
 Dow Corning BR2-PLUS
 Lubricate-Fiske #3000
 Shell Super Duty Grease
 Imperial #777
 Mobile Grease Special
 Sunoco Moly #2EP
Note: For Hale SVS Torrent Stainless Valves see separate manual for additional lubrication
information.
 Green Grease for SVS Valves
Loctite Sealant
 #246 High Temperature Removable Threadlock (or equivalent) - primarily for gear-
box assembly
 #242 Medium Strength Threadlock (or equivalent) - primarily for pump assembly
Oil
See “Alternate Lubricant Manufacturers” on page 185.
Recommended Cleaners
 Safety Kleen ®
 Stoddard Solvent
IMPORTANT!
THE USE AND DISPOSAL OF SOLVENTS / CLEANERS MUST BE IN ACCORDANCE
WITH YOUR LOCAL ENVIRONMENTAL REGULATIONS.