Philips Prestigo Universal remote control SRT8215 Touch 15 in 1 - Manual (Page 47)

43
Some devices require that a command is sent for some time (long button press).
To simulate this in an activity action list, select the activity in Configo and click the
„Advanced‟ button.
Right-click the input command and select „Details‟. Increase the duration of the
signal as needed.
Can I change the volume controls for my activity?
No, the volume buttons are assigned while generating the activity. Recreate the
activity and select in the „Add activity screen‟ which speakers you want to use.
Can I edit the Activity macro/Action list?
Yes, click the activity in Configo. Then click the „Advanced‟ button. The macro
(action list) can contain up to 12 actions.
It takes a lot of time to start up all my devices when I start an activity. Can I
shorten this?
Yes, select and edit the activity in Configo. Click the „Advanced‟ button.
You can add/remove actions from the list and edit delays to optimize and shorten
the action list that is played when you start the activity.
Can I modify the behavior of the Power button in activity?
No, when you press the Power button in activity, your Prestigo switches off the
devices that participate in the activity.
If one of the devices is not switched off correctly, try selecting a different function
to switch off this device in the settings for this activity. To do so, click the activity,
then click „Settings‟ and select the device that does not switch off. In the following
screen, select the command that should be used to switch off the device.
How can I power off all the devices that were used in an activity I’ve just started?
When the activity is started, you can press the Power button to power off all the
participating devices.
-or-
Navigate back to the Activities list or Devices list and press the Power button to
open the „Power Off‟ menu screen.
Press the buttons for the devices you want to power off.
-or-
Navigate back to the Devices list, select a device and press the Power button to
power off this device. Repeat for all the devices required.
How can I tell which devices are participating in an activity?
To see the list of participating devices, click the activity and then click Settings.
Configo Application
My original remote no longer works. Why does my device not switch off when I
use the Prestigo to automatically detect its settings?
This is a known issue for adding Panasonic TV‟s and Nokia set-top boxes. Some
other devices may be affected as well.
If you do not have the original remote or a working universal remote control for
this device, try releasing the power button of the Prestigo for every option and
check if other buttons work.
If you still have the remote control of your Panasonic TV, try having it
automatically recognized or use the remote.