Brother FAX 2600 - Manual (Page 82)

8 - 6 R E M O T E F A X O P T I O N S
Changing Fax Forwarding Number
You can change the default setting of your fax forwarding number from a
remote fax machine.
1
Dial your fax number.
2
When you hear the beep, immediately enter your Remote Retrieval Access Code
(
1 5 9 ).
3
When you hear two short beeps, enter 9 5 4 .
4
Enter the new number of the remote fax machine where you want your fax
messages forwarded (up to 20 digits), then press
# # .
5
To retrieve the Memory Status List, when you hear two short beeps, use the dial
pad to press
9 6 1 .
6
Use the dial pad to enter the number of the remote fax machine (up to 20 digits),
and then press
# # .
7
After you hear your FAX/MFC beep, hang up and wait.Your FAX/MFC calls
the remote fax machine. The remote fax machine prints the Memory Status List
showing the new forwarding number.
8
Check the forwarding number.
If the forwarding number is incorrect, return to Step 1 and reset it.
Note
You cannot use and # as dial numbers. However, if you want to store a
pause, press # .