Brother FAX 2600 - Manual (Page 77)

R E M O T E F A X O P T I O N S 8 - 1
8
8
Remote Fax Options
Fax Forwarding/Paging
Programming a Fax Forwarding Number
When Fax Forwarding is set to ON, your FAX/MFC stores the received fax in
memory, then dials the fax number you’ve programmed, and forwards the fax
message.
1
For the FAX, press Function , 8 , 1 .
For the MFC, press Function , 1 , 8 , 1 .
2
Press or until the screen displays
FAX FORWARD? and press Set .
3
Enter the forwarding number (up to 20 digits) and press Set .
4
Press Stop to exit.
You can NOT use Paging and Fax Forwarding at the same time.
You can NOT use Paging and Fax Forwarding when “Fax Storage” is set to
OFF.
FWD#:
ENTER & SET