Speed dialing, Dialing access codes and credit card numbers, Search – Brother FAX 2600 User Manual
Page 74: Are 30 speed dial locations. (see, Speed dialing 1
7 - 5
A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S
Speed Dialing
1
Pick up the handset—OR—Press
Hook
.
(See
2
When you hear a dial tone, press
Search/Speed Dial
, press
#
, then press the
two-digit Speed Dial location.
3
If you pressed
Hook
to dial the call, pick up the handset when the other party
answers. (The speaker works only one way; the other party won’t be able to hear
you unless you pickup the handset.)
4
To hang up, replace the handset.
Dialing Access Codes and Credit Card Numbers
Sometimes you may want to choose from among several long distance carriers
when you make a call. Rates may vary depending upon the time and destination.
To take advantage of low rates, you can store the access codes or long-distance
carriers as One Touch numbers. You can store these long dialing sequences by
dividing them and setting them up on separate keys in any combination. You
can even include manual dialing using the dial pad. The combined number will
be dialed in the order you entered it, as soon as you press
Start
.
(See
Storing One Touch Dial Numbers
You can store “555” on One Touch key
03
and “7000” on One Touch key
02
.
If you press One Touch
03
,
02
, and
Start
, you can dial “555-7000”. To
temporarily change a number, you can substitute part of the number with manual
dialing using the dial pad. For example, to change the number to 555-7001 you
could press One Touch
03
and press
7
,
0
,
0
,
1
using the dialing pad.
Search
You can search for names you have stored in One Touch and Speed Dial
memories. Names are stored alphabetically. (See
1
Press
Search/Speed Dial
, then enter the first letter of the name you’re looking for.
2
Press
or
to search the memory.
3
When the LCD displays the name you want to call, pick up the handset or press
Hook
.
4
Press
Start
to begin dialing.
5
If you pressed
Hook
to dial the call, pick up the handset when the other party
answers. (The speaker works only one way; the other party won’t be able to hear
you unless you pickup the handset.)
6
When the call is over, hang up.
Note
If you are sending a fax, press
Start
after pressing the Speed Dial number. If
you picked up the handset, press
Start
when the receiving fax machine answers
with fax tones.