beautypg.com

Advanced receiving operations, For fax/tel mode only, Changing remote codes – Brother FAX 2600 User Manual

Page 53: Advanced receiving operations -6, Operation from extension telephone or external, Telephone -6, For fax/tel mode only -6 changing remote codes -6, Delayed fax, Multiple resolution transmission, Fax/tel mode only

background image

S E T U P R E C E I V E

5 - 6

Advanced Receiving Operations

Operation from Extension Telephone or External
Telephone

If you answer a fax call on an extension phone or on an external phone in the
EXT. jack, you can make your FAX/MFC take over by using the Fax Receive
Code. When you press the Fax Receive Code

5

1

, the FAX/MFC starts to

receive a fax. (See

Setting F/T Ring Time

, page 5-3 and

Easy Receive

, page 5-3.)

If the FAX/MFC answers a voice call and double-rings for you to take over, use
the Telephone Answer Code

# 5 1

to take the call at an extension phone.

If you answer a call, and no one is on the line, assume you’re receiving a fax. At
the FAX/MFC phone, press

Start

, then hang up. At an extension phone, press

5

1

, wait for fax receiving tones (chirps), then hang up. At an external phone,

press

5

1

and wait for the phone to be disconnected (the screen displays

RECEIVE) before you hang up. (Your caller will have to press

Start

to send

the fax.)

For FAX/TEL Mode Only

When the FAX/MFC is in FAX/TEL mode, it will use the F/T Ring Time
(double ringing) to alert you to pick up a voice call. If you’re at the FAX/MFC,
you can lift the handset to answer.

If you’re at an extension phone, you’ll need to lift the handset during the F/T
Ring Time and press

# 5 1

between the double rings. If no one is on the line, or

if someone wants to send you a fax, send the call back to the FAX/MFC by
pressing

5

1

.

Changing Remote Codes

Remote Codes might not work with some telephone systems. The preset Fax
Receive Code is

5

1

. The preset Telephone Answer Code is

# 5 1

.

1

For the FAX, press

Function

,

2

,

4

.

For the MFC, press

Function

,

1

,

2

,

4

.

2

Press

or

to select ON (or OFF) and press

Set

.

3

If you want to, enter a new Fax Receive Code,
then press

Set

.

4

If you want to, enter a new Telephone Answer
Code, then press

Set

.

5

Press

Stop

to exit.

Note

If you are always disconnected when accessing your external TAD remotely,
try changing the Fax Receive Code from

5

1

to

#

#

#

and the Telephone

Answer Code from

# 5 1

to

9 9 9

.

REMOTE ACT.:ON?

FAX RECEIVE:

*

51

TEL ANSWER:#51

This manual is related to the following products: