Philips CDR800 - Manual (Page 18)

Loading discs
Important!
1) This set is designed for regular CD(RW)s.
Therefore, do not use any accessories such as disc
stabilizer rings or CD treatment sheets, etc. as offered
on the market, because they may cause jamming of
the changer mechanism.
2) Do not load more than one disc into one tray.
1 CD changer: Press OPEN/CLOSE / to open the disc
compartment.
➜
OPEN CHANGER lights up.
CD recorder: Press OPEN/CLOSE
/ to open the disc
tray.
➜
OPEN CDR lights up.
Note: Opening the changer disc compartment or recorder disc
tray will clear any program present.
2 CD changer: Insert CDs in the two outer disc trays, label
side up.
0 To insert a third disc press CD CHANGE.
➜ The CD carousel tray will rotate once.
CD recorder: Insert a disc in the tray, label side up.
3 CD changer: Press OPEN/CLOSE / again or gently push
the compartment to close it.
➜
READING is displayed.
➜ The display will show CD , the number of the the last
selected tray, its number of tracks and total playing time.
CD recorder: Press OPEN/CLOSE
/ again or gently push
the tray to close it.
➜
READING is displayed.
➜ If an unfinalized disc is inserted,
INITIALIZING is
displayed.
➜ The display will show the type of disc inserted, its
number of tracks and the total playing time of the disc.
MP3 discs only:
➜
READING is displayed, followed by a continuous
upcounting of tracks and MP 3 lights up.
➜
CD, the disc tray number or CDR and the first album
name are displayed.
Changing discs during play/recording
1 Press OPEN/CLOSE
/ to open the disc compartment.
➜
OPEN CHANGER lights up.
2 The CDs in the two outer disc trays can be changed while
play or recording continues.
Playing
1 Press CDR, CD 1, 2 or 3 to select the required disc.
2 Press PLAY/PAUSE 2/; to start play.
➜
CDR, CD 1, 2 or 3, the number of the current track
and elapsed playing time are displayed.
0 Press DISPLAY repeatedly to display:
➜ track number, remaining playing time of current track;
➜ track number, remaining playing time of disc;
➜ track number, actual playing time of current track;
➜ for MP3 discs, pressing DISPLAY will only display album
name and elapsed playing time.
3 To stop play, press STOP 9.
➜
CDR, CD 1, 2 or 3, the number of tracks and the
total playing time of the disc appear on the display.
➜ when an MP3 disc was playing,
CD, the disc tray number
or CDR and the first album name are displayed.
0 To interrupt play temporarily, press PLAY/PAUSE
2/;.
➜ The time where playback is interrupted is blinking.
0 To continue play, press PLAY/PAUSE
2/; again.
Loading discs Playing
15
English
xp CDR 800/17.1 eng. 25-07-2001 15:12 Pagina 15