Configuring a user account, Configuration procedure, Configuring a user account on – Black Box 16 port User Manual
Page 99: Configuring a user, Configuring

Black Box Console Server user guide
99
Configuring a user account
The section includes the following:
•
Configuration procedure on page 100
•
User form field descriptions on page 101
•
•
.
Configuration procedure
To configure a user account, proceed as follows;
Tip
Your configuration will only be used if the user is authenticated by the unit. If the
user is authenticated by RADIUS, the unit will use configuration details for users
sent by the RADIUS host; see
Configuring a dial in line on page 74
.
1.
Select ‘Change User’ from the Users menu (cli syntax: set user).
2.
Choose your user from the list of names now displayed.
A user form will now be displayed as shown in the next example (uses default
values):
3.
Within the user form, set the fields you require.See
for a description of how to set each field in more detail.
4.
Press
Note
Changes you make in this form, as the system administrator, will only take effect for
a user when the user next logs in to the unit.