Set up procedure – Black Box 16 port User Manual
Page 39
Black Box Console Server user guide
39
Set up procedure
To manually set up an IP address proceed as follows;
1.
Set up a terminal or PC running terminal emulation. For examples of connection
pinouts see
Appendix A Cabling information
If you connect via the Admin Port you will see a display of diagnostic and bootup
messages.
Note that if you cannot emulate VT100, you will have to use the Command Line
Interface (cli); (the cli commands are described in full in
2.
At the console, with the login prompt displayed, type admin and press
3.
At the password prompt, now displayed type superuser and press
is the default admin user password.
The command line prompt will now be displayed:
4.
At the command prompt type screen and press
mode.
The main menu is now displayed:
5.
At the main menu, select ‘server configuration’. (alternatively, use the cli
command set server)
The server form will be displayed as shown in the next picture: