Black Box 16 port - Manual (Page 148)

Black Box Console Server user guide 148
See also delete WINS , add DNS , show server
admin
user level:
normal If you are a normal user, this command enables you to enter Admin mode. But only if
you know the admin password. This will give you full access to the unit’s commands.
The unit’s prompt will change to a hash or pound sign (JS_8500# or JS_8500£) to
indicate that you are in admin mode. You must log out and back in again to revert to
your original mode.
Syntax
a d m i n
Menu
equivalent Sessions - Become Admin User
debug
level of user:
admin This command will send debug information to the screen. You can be connected to
either the Admin port or a front-mounted port. Use this command only when
instructed by your Technical Support.
Syntax d e b u g
Menu
equivalent (none available)
See also -
delete ARP
This command enables you to delete the ARP table. This is useful for diagnostic and
debugging purposes.
This command is only available from the CLI.
Syntax d e l e t e a r p
See also show ARP
delete community
user level:
admin This command enables you to delete SNMP communities defined using the add
community
command.
Syntax d e l e t e c o m m u n i t y 1 | 2 | 3 | 4